Netgear RP614 User Manual download pdf (Page 62)

Reference Manual for the Model RP614 Web Safe Router

6-4 Maintenance

Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the

local network. From the Main Menu of the browser interface, under the Maintenance heading,

select Attached Devices to view the table, shown in Figure 6-3

Figure 6-3. Attached Devices menu

For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet

MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers

the devices. To force the router to look for attached devices, click the Refresh button.

Router Software Upgrade

The routing software of the Model RP614 router is stored in FLASH memory, and can be

upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from

Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary

(.BIN) file before sending it to the router. The upgrade file can be sent to the router using your

browser.

Note: The Web browser used to upload new firmware into the Model RP614 router must support

HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape Navigator

3.0 or above.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 106 107

No comments

Netgear RP614 User Manual Page 62