Netgear RP614 User Manual download pdf (Page 73)

Reference Manual for the Model RP614 Web Safe Router

Advanced Configuration of the Router 7-7

LAN IP Setup

The second feature category under the Advanced heading is LAN IP Setup. This menu allows

configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser

interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown in

Figure 7-3

Figure 7-3. LAN IP Setup Menu

The router is shipped preconfigured to use private IP addresses on the LAN side, and to act.as a

DHCP server. The router’s default LAN IP configuration is:

• LAN IP addresses—192.168.0.1

• Subnet mask—255.255.255.0

These addresses are part of the IETF-designated private address range for use in private networks,

and should be suitable in most applications. If your network has a requirement to use a different IP

addressing scheme, you can make those changes in this menu.

DHCP

By default, the router will function as a DHCP (Dynamic Host Configuration Protocol) server,

allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to

the router's LAN. The assigned default gateway address is the LAN address of the router. IP

addresses will be assigned to the attached PCs from a pool of addresses specified in this menu.

Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 106 107

No comments

Netgear RP614 User Manual Page 73