Netgear RP614 User Manual download pdf (Page 47)

Reference Manual for the Model RP614 Web Safe Router

Basic Configuration of the Router 4-7

A DNS server is a host on the Internet that translates Internet names (such as www

addresses) to numeric IP addresses. Typically your ISP transfers the IP addresses of one or

two DNS servers to your router during login. If the ISP does not transfer an address, you

must obtain it from the ISP and enter it manually here. If you enter an address here, you

should reboot your PCs after configuring the router.

3. ClickonApply,thenproceedto“Completing the Configuration“ on page 4-9.

Configuring for an Account with Login

If the Setup Wizard determines that your Internet service account uses a login protocol such as

PPP over Ethernet (PPPoE), you will be directed to a menu like the PPPoE menu shown in

Figure 4-5 below:

Figure 4-5. Setup Wizard menu for PPPoE login accounts

Enter your Account Name (may also be called Host Name) and Domain Name. These

parameters may be necessary to access your ISP’s services such as mail or news servers. If you

leave the Domain Name field blank, the router will attempt to learn the domain automatically

from the ISP. If this is not successful, you will need to enter it manually.

2. Enter the PPPoE login user name and password provided by your ISP. These fields are case

sensitive. If you wish to change the login timeout, enter a new value in minutes.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 106 107

No comments

Netgear RP614 User Manual Page 47