Netgear R7500 User Manual download pdf (Page 29)

Specify Your Internet Settings

Nighthawk X4 AC2350 Smart WiFi Router

The screen adjusts:

The router automatically detects the information in the following fields:

• Connection T

ype. This field indicates the connection type that is detected.

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. Select

an IP Address Assignment radio button:

• Use DHCP Server.

This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config.

This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

7. (Optional) Select the Use This Interface ID check box and specify the interface ID to be

used for the IPv6 address of the router’

s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

8. Click the Apply button.

Your settings are saved.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 169 170

No comments

Netgear R7500 User Manual Page 29