Netgear R7500 User Manual download pdf (Page 36)

Specify Your Internet Settings

Nighthawk X4 AC2350 Smart WiFi Router

Most people can leave this field blank, but if your ISP gave you a specific host name,

enter it here.

7. (Optional) In the Domain Name (If Required) field, enter a domain name.

You can type the domain name of your IPv6 ISP. Do not enter the domain name for the

IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz

as the domain name. If your ISP provided a domain name, type it in this field. For

example, Earthlink Cable might require a host name of home, and Comcast sometimes

supplies a domain name.

8. Select an IP Address Assignment radio button:

• Use DHCP Server. This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

9. (Optional) Select the Use This Interface ID check box and specify the interface ID to be

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

10. Click the Apply button.

Your settings are saved.

Set Up an IPv6 PPPoE Internet Connection

 To set up a PPPoE IPv6 Internet connection:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection Type list, select PPPoE.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 169 170

No comments

Netgear R7500 User Manual Page 36