Netgear R7500 User Manual Page 121
- Page / 170
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Network Settings
121
Nighthawk X4 AC2350 Smart WiFi Router
4. Select ADVANCED > Setup > LAN Setup.
5. Make sure that the Use Router as DHCP Server check box is selected.
6. Specify the range of IP addresses that the router assigns:
a. In the Starting IP
Address field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b. In the Ending IP
Address field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the router.
7. Click the Apply button.
Your settings are saved.
The router delivers the following parameters to any LAN device that requests DHCP:
• An IP address from the range that you define
• Subnet mask
• Gateway IP address (the router’
s LAN IP address)
• DNS server IP address (the router’
s LAN IP address)
Disable the DHCP Server Feature in the Router
By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default
gateway addresses to all computers connected to the LAN. The assigned default gateway
address is the LAN address of the router.
You can use another device on your network as the DHCP server or specify the network
settings of all your computers.
To disable the DHCP server feature in the router:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
- Nighthawk X4 AC2350 Smart 1
- WiFi Router 1
- Trademarks 2
- Compliance 2
- Contents 3
- Chapter 11 Network Settings 5
- Chapter 14 Troubleshooting 6
- Unpack Your Router 9
- Top View 9
- Hardware Setup 10
- Rear Panel 11
- Attach the Antennas 12
- USB Ports on the Left Panel 12
- Connect an eSATA Device 13
- Position Your Router 14
- Cable Your Router 15
- Connect to the Network and 16
- Access the Router 16
- Connect to the Network 17
- Types of Logins 18
- Change the Language 20
- Use the Internet Setup Wizard 23
- Scroll to 24
- Change the MTU Size 38
- Table 2. Common MTU sizes 39
- Optimize Performance 40
- Management 41
- To enable Dynamic QoS: 42
- To disable WMM QoS: 47
- Set Up Parental Controls 49
- To set up access control: 51
- To block Internet sites: 54
- To block services: 55
- To schedule blocking: 57
- USB Device Requirements 63
- To connect a USB device: 64
- Use FTP Within the Network 70
- To view network folders: 71
- To add a network folder: 72
- To edit a network folder: 73
- Approve USB Devices 74
- Safely Remove a USB Device 75
- To set up FTP access: 78
- Dynamic DNS 79
- FTP Directory: FTP:// 80
- FTP Directory: 80
- To change your settings: 82
- To play videos: 88
- Share a USB Printer 90
- To download the utility: 91
- To install the utility: 92
- Use the Shared Printer 93
- To change the language: 96
- To specify the time-out: 97
- Update the Router Firmware 99
- Change the admin Password 100
- Recover the admin Password 100
- To recover your password: 101
- View Router Status 102
- Manage Your Network 103
- To view and manage logs: 105
- Monitor Internet Traffic 106
- Custom Static Routes 107
- Set Up a Static Route 108
- Edit a Static Route 109
- Delete a Static Route 109
- Back Up Settings 111
- Remote Management 113
- To use remote access: 114
- Network Settings 115
- View WAN Settings 116
- Set Up a Default DMZ Server 117
- Reserve an IP Address 122
- Edit a Reserved IP Address 123
- To use the WPS Wizard: 124
- Specify Basic WiFi Settings 125
- Change the WiFi Mbps Settings 126
- Enable a WiFi Video Network 128
- Set Up a Guest WiFi Network 129
- To set up a guest network: 131
- Control the Wireless Radios 132
- Set Up a Wireless Schedule 133
- Specify WPS Settings 134
- Cable this port to a LAN port 135
- Use the Router in Bridge Mode 137
- Internet 140
- Open VPN 140
- To specify the VPN service: 141
- Use a VPN Tunnel 143
- To open a VPN tunnel: 144
- To add a custom service: 150
- Set Up Port Triggering 153
- Enable Port Triggering 154
- Troubleshooting 157
- Quick Tips 158
- Troubleshoot with the LEDs 159
- Cannot Log In to the Router 160
- Cannot Access the Internet 161
- Troubleshoot PPPoE 162
- Changes Not Saved 164
- Wireless Connectivity 164
- Supplemental Information 167
- Factory Settings 168
- Supplemental Information 169
- Technical Specifications 170
Related products and manuals for Routers Netgear R7500
Routers Netgear WN2500RP User Manual
(86 pages)
(86 pages)
Routers Netgear R8000 User Manual
(168 pages)
(168 pages)
Routers Netgear WNDRMAC Specifications
(114 pages)
(114 pages)
Routers Netgear WNDR4700 Specifications
(140 pages)
(140 pages)
Routers Netgear WNR2000 Specifications
(82 pages)
(82 pages)
Routers Netgear R6200 User Manual
(130 pages)
(130 pages)
Routers Netgear WNDR4500 User Manual
(127 pages)
(127 pages)
Routers Netgear R6300 User Manual
(135 pages)
(135 pages)
Routers Netgear WNDR4000 User Manual
(104 pages)
(104 pages)
Routers Netgear DG834 Operations Instructions
(142 pages)
(142 pages)
Routers Netgear D6200 User Manual
(162 pages)
(162 pages)
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 0.066 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals