Netgear R7500 User Manual download pdf (Page 108)

Manage Your Network

108

Nighthawk X4 AC2350 Smart WiFi Router

request to the company where you are employed, and the company firewall is likely to deny

the request.

In this case you must define a static route, telling your router to access 134.177.0.0 through

the ISDN router at 192.168.1.100. Here is an example:

• The Destination IP Address and IP Subnet Mask fields specify that this static route

applies to all 134.177.x.x addresses.

• The Gateway IP

Address field specifies that all traffic for these addresses will be

forwarded to the ISDN router at 192.168.1.100.

• A metric value of 1 works because the ISDN router is on the LAN.

• Private is selected only as a precautionary security measure in case RIP is activated.

Set Up a Static Route

 To set up a static route:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. T

ype http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > Static Routes.

The Static Routes screen displays.

5. Click the Add button.

The screen adjusts.

6. In the Route Name field, type a name for this static route (for identification purposes only).

7. Select the Private check box if you want to limit access to the LAN only

If the Private check box is selected, the static route is not reported in RIP

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 169 170

No comments

Netgear R7500 User Manual Page 108