Netgear R7500 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Table 1. LED and button descriptions
LED Description
Power
Solid amber. The router is starting.
Blinking amber. The
firmware is upgrading, or the Reset button was pressed.
Solid white. The
router is ready.
Blinking white. The
firmware is corrupted.
Off. Power is not supplied to the router.
Internet
Solid white. The Internet connection is ready.
Solid amber.
The router detected an Ethernet cable connection to the modem.
Off. No Ethernet cable is connected between the router and the modem.
2.4 GHz WiFi
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking. The
router is sending or receiving WiFi traffic.
Off.
The 2.4 GHz WiFi radio is off.
5 GHz WiFi
Solid white. The 5 GHz WiFi radio is operating.
Blinking. The
router is sending or receiving WiFi traffic.
Off. The
5 GHz WiFi radio is off.
USB 3.0 port 1
and USB 3.0
port 2
Solid white. A USB device is connected and is ready.
Blinking.
A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove Hardware
button and it is now safe to remove the attached USB device.
eSATA
Solid white. An eSATA device is connected and is ready.
Blinking.
An eSATA device is plugged in and is trying to connect.
Off. No eSA
TA device is connected.
Ethernet ports
1–4
The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100
Mbps or 10 Mbps Ethernet connections.
Solid.
A powered-on device is connected to the Ethernet port.
Blinking.
The port is sending or receiving traffic.
Off. No device is connected to this Ethernet port.
WiFi On/Off
button with LED
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you
cannot use WiFi to connect to the router.
WPS button with
LED
This button lets you use WPS to join the WiFi network without typing the WiFi password. The
WPS LED blinks white during this process and then lights solid white.
Hardware Setup
10
Nighthawk X4 AC2350 Smart WiFi Router
You can use the LED On/Off switch on the rear panel of the router to turn the LEDs on the
top of the router on or off. See Turn the LEDs On or Off on page 11.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 169 170

Comments to this Manuals

No comments