Netgear D6200 User Manual Page 151
- Page / 162
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
151
D6200 WiFi DSL Modem Router
You should see a message like this one:
Pinging <IP address > with 32 bytes of data
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the path is not functioning correctly, you might have one of the following problems:
• Wrong physical connections
For a wired connection, make sure that the numbered LAN port LED is lit for the port to
which you are connected.
Check that the appropriate LEDs are lit for your network devices. If your WiFi DSL
modem router and computer are connected to a separate Ethernet switch, make sure
that the Ethernet LEDs are lit for the switch ports that are connected to your computer
and WiFi DSL modem router.
• Wrong network configuration
Verify that the Ethernet card driver software and TCP/IP software are both installed and
configured on your computer.
Verify that the IP address for your WiFi DSL modem router and your computer are correct
and that the addresses are on the same subnet.
Test the Path from Your Computer to a Remote Device
After verifying that the LAN path works correctly, test the path from your computer to a
remote device.
1. From the Windows toolbar, click Start and select Run.
2. In the Windows Run window, type:
ping -n 10 <IP address>
where <IP address> is the IP address of a remote device such as your ISP DNS server.
If the path is functioning correctly, replies like the examples shown in the previous section are
displayed.
If you do not receive replies:
• Check that your computer has the IP address of your WiFi DSL modem router listed as
the default gateway. If the IP configuration of your computer is assigned by DHCP, this
information is not visible in your computer’s Network Control Panel. Verify that the IP
address of the WiFi DSL modem router is listed as the default gateway.
• Check to see that the network address of your computer (the portion of the IP address
specified by the subnet mask) is different from the network address of the remote device.
- D6200 WiFi DSL Modem Router 1
- Trademarks 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 ReadySHARE Printer 4
- Chapter 7 Security 5
- Chapter 8 Administration 5
- Chapter 9 Advanced Settings 5
- Chapter 10 Troubleshooting 6
- Product Highlights 8
- Product Specifications 9
- Hardware Setup 10
- Unpack Your New Router 11
- Hardware Features 12
- Back Panel 13
- Front Panel 14
- Table 1. Power On/Off LED 15
- Table 2. DSL LED 15
- Table 3. Internet LED 15
- Table 4. Wireless LED 16
- Table 5. USB LED 16
- Side Panel 17
- Position Your Wireless Router 18
- ADSL Microfilters 18
- Figure 8. Cabling diagram 20
- Verify the Cabling 21
- Types of Logins and Access 23
- NETGEAR genie Setup 24
- ******** 25
- Manual Method 27
- NETGEAR genie BASIC Settings 29
- Internet Basic Settings 30
- Attached Devices 32
- Parental Controls 33
- Basic Wireless Settings 33
- Wireless Network 35
- Security Options Settings 35
- Wireless Security Options 36
- Guest Networks 37
- NETGEAR genie App 38
- NETGEAR genie ADVANCED Home 40
- Setup Wizard 42
- WPS Wizard 44
- VPN Wizard 45
- Setup Menu 47
- ADSL Setup 48
- WAN Setup 49
- Default DMZ Server 50
- Change the MTU Size 51
- LAN Setup 52
- LAN Setup Screen Settings 53
- Use Router as DHCP Server 54
- Address Reservation 54
- Quality of Service Setup 56
- Add a Priority Rule 57
- USB Storage 60
- ReadySHARE Access 61
- USB Drive Requirements 61
- File-Sharing Scenarios 62
- USB Storage Basic Settings 64
- Add or Edit a Network Folder 65
- USB Storage Advanced Settings 66
- Media Server Settings 68
- Specify Approved USB Devices 69
- ReadySHARE Cloud 70
- To set up ReadySHARE Cloud: 71
- Safely Remove a USB Drive 73
- ReadySHARE Printer 74
- Security 84
- Firewall Rules 86
- To create firewall rules: 87
- To add a custom service: 89
- Schedule for Firewall Rules 90
- Click Check 94
- Reboot the Router 97
- Connection Statistics 97
- Connection Status 98
- View VPN Status 99
- To view the logs: 100
- Manage the Configuration File 101
- Set Password 102
- Administration 103
- D6200 WiFi DSL Modem Router 103
- Diagnostics 104
- Advanced Settings 106
- Advanced Wireless Settings 107
- Turn Off Radio By Schedule 108
- WPS Settings 108
- Wireless Access List 109
- Wireless Repeating Function 112
- Set Up the Base Station 113
- Set Up a Repeater Unit 114
- Remote Computer Access Basics 115
- To set up port forwarding: 119
- Add a Custom Service 120
- Set Up Port Triggering 122
- Dynamic DNS 124
- To set up Dynamic DNS: 125
- Static Routes 126
- To set up a static route: 127
- Remote Management 129
- Universal Plug and Play 131
- Traffic Meter 133
- Device Mode 135
- VPN Policies 135
- To manage the VPN policies: 136
- Troubleshooting 142
- Quick Tips 143
- Troubleshoot with the LEDs 144
- LEDs Never Turn Off 145
- Wireless LED Is Off 145
- Cannot Log In to the Router 146
- Cannot Access the Internet 146
- Troubleshoot PPPoE 148
- Changes Not Saved 149
- Incorrect Date or Time 149
- Wireless Connectivity 149
- Request timed out 151
- Supplemental Information 153
- Technical Specifications 155
- Notification of Compliance 156
- FCC Caution 157
Related products and manuals for Routers Netgear D6200
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 0.930 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals