Advanced Settings
127
D6200 WiFi DSL Modem Router
To set up a static route:
1. Select ADVANCED > Advanced Setup > Static Routes.
2. Click Add.
3. In the Route Name field, type a name for this static route (for identification purposes only.)
4. (Optional) Select the Private check box if you want to limit access to the LAN only
.
If Private is selected, the static route is not reported in RIP.
5. Select the Active check box.
6. T
ype the IP address of the final destination.
7. T
ype the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
Comments to this Manuals