Netgear D6200 User Manual Page 144
- Page / 162
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
144
D6200 WiFi DSL Modem Router
• Some cable modem service providers require you to use the MAC address of the
computer initially registered on the account. You can view the MAC address in the
Attached Devices screen.
Troubleshoot with the LEDs
After you turn on power to the WiFi DSL modem router, the following sequence of events
should occur:
1. When power is first applied, verify that the Power LED is lit.
2. Verify that the Power LED turns red within a few seconds, indicating that the self-test is
running.
3. After approximately 30 seconds, verify the following:
• The Power LED is solid green.
• The Internet LED is lit.
• The Ethernet LED is lit for any local port that is connected to a computer. This LED
indicates that a link has been established to the connected device.
The LEDs on the front panel of the WiFi DSL modem router can be used for troubleshooting.
Power LED Is Off or Blinking
• Make sure that the power cord is securely connected to your WiFi DSL modem router and
that the power adapter is securely connected to a functioning power outlet.
• Make sure that you are using the power adapter that NETGEAR supplied for this product.
• If the Power LED blinks slowly and continuously, the WiFi DSL modem router firmware is
corrupted. This situation can happen if a firmware upgrade is interrupted, or if the WiFi
DSL modem router detects a problem with the firmware. If the error persists, you have a
hardware problem. For recovery instructions or help with a hardware problem, contact
technical support at
http://support.netgear.com/general/contact/default.aspx.
Power LED Stays Red
When the WiFi DSL modem router is turned on, the Power LED turns red for about 20
seconds and then turns green. If the LED does not turn green, the WiFi DSL modem router
has a problem.
If the Power LED is still red 1 minute after you turn on power to the WiFi DSL modem router:
1. Turn off the power and back on to see if the WiFi DSL modem router recovers.
2. Press and hold the Reset button to return the WiFi DSL modem router to its factory settings.
See Factory Settings on page 153.
If the error persists, you might have a hardware problem and should contact technical
support at
www.netgear.com/support.
- D6200 WiFi DSL Modem Router 1
- Trademarks 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 ReadySHARE Printer 4
- Chapter 7 Security 5
- Chapter 8 Administration 5
- Chapter 9 Advanced Settings 5
- Chapter 10 Troubleshooting 6
- Product Highlights 8
- Product Specifications 9
- Hardware Setup 10
- Unpack Your New Router 11
- Hardware Features 12
- Back Panel 13
- Front Panel 14
- Table 1. Power On/Off LED 15
- Table 2. DSL LED 15
- Table 3. Internet LED 15
- Table 4. Wireless LED 16
- Table 5. USB LED 16
- Side Panel 17
- Position Your Wireless Router 18
- ADSL Microfilters 18
- Figure 8. Cabling diagram 20
- Verify the Cabling 21
- Types of Logins and Access 23
- NETGEAR genie Setup 24
- ******** 25
- Manual Method 27
- NETGEAR genie BASIC Settings 29
- Internet Basic Settings 30
- Attached Devices 32
- Parental Controls 33
- Basic Wireless Settings 33
- Wireless Network 35
- Security Options Settings 35
- Wireless Security Options 36
- Guest Networks 37
- NETGEAR genie App 38
- NETGEAR genie ADVANCED Home 40
- Setup Wizard 42
- WPS Wizard 44
- VPN Wizard 45
- Setup Menu 47
- ADSL Setup 48
- WAN Setup 49
- Default DMZ Server 50
- Change the MTU Size 51
- LAN Setup 52
- LAN Setup Screen Settings 53
- Use Router as DHCP Server 54
- Address Reservation 54
- Quality of Service Setup 56
- Add a Priority Rule 57
- USB Storage 60
- ReadySHARE Access 61
- USB Drive Requirements 61
- File-Sharing Scenarios 62
- USB Storage Basic Settings 64
- Add or Edit a Network Folder 65
- USB Storage Advanced Settings 66
- Media Server Settings 68
- Specify Approved USB Devices 69
- ReadySHARE Cloud 70
- To set up ReadySHARE Cloud: 71
- Safely Remove a USB Drive 73
- ReadySHARE Printer 74
- Security 84
- Firewall Rules 86
- To create firewall rules: 87
- To add a custom service: 89
- Schedule for Firewall Rules 90
- Click Check 94
- Reboot the Router 97
- Connection Statistics 97
- Connection Status 98
- View VPN Status 99
- To view the logs: 100
- Manage the Configuration File 101
- Set Password 102
- Administration 103
- D6200 WiFi DSL Modem Router 103
- Diagnostics 104
- Advanced Settings 106
- Advanced Wireless Settings 107
- Turn Off Radio By Schedule 108
- WPS Settings 108
- Wireless Access List 109
- Wireless Repeating Function 112
- Set Up the Base Station 113
- Set Up a Repeater Unit 114
- Remote Computer Access Basics 115
- To set up port forwarding: 119
- Add a Custom Service 120
- Set Up Port Triggering 122
- Dynamic DNS 124
- To set up Dynamic DNS: 125
- Static Routes 126
- To set up a static route: 127
- Remote Management 129
- Universal Plug and Play 131
- Traffic Meter 133
- Device Mode 135
- VPN Policies 135
- To manage the VPN policies: 136
- Troubleshooting 142
- Quick Tips 143
- Troubleshoot with the LEDs 144
- LEDs Never Turn Off 145
- Wireless LED Is Off 145
- Cannot Log In to the Router 146
- Cannot Access the Internet 146
- Troubleshoot PPPoE 148
- Changes Not Saved 149
- Incorrect Date or Time 149
- Wireless Connectivity 149
- Request timed out 151
- Supplemental Information 153
- Technical Specifications 155
- Notification of Compliance 156
- FCC Caution 157
Related products and manuals for Routers Netgear D6200
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 0.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals