Netgear D6200 User Manual download pdf (Page 37)

NETGEAR genie BASIC Settings

D6200 WiFi DSL Modem Router

Guest Networks

Adding a guest network allows visitors at your home to use the Internet without using your

wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n

and 5.0 GHz a/n.

 To set up a guest network:

1. From the BASIC Home screen, select Guest Network.

2. Configure the following settings:

Note: These settings display in separate sections of the screen to the 2.4

GHz b/g/n and 5 GHz a/n bands.

• Enable Guest Network. When this check box is selected, the guest network is

enabled, and guests can connect to your network using the SSID of this profile.

• Enable SSID Broadcast. If this check box is selected, the wireless access point

broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt

the correct SSID for connections to this access point.

• Allow guest to access My Local Network. If this check box is selected, any user

who connects to the network with this SSID has access to your local network, not just

Internet access.

• Enable W

ireless Isolation. If this check box is selected, wireless clients (computers

or wireless devices) that join the network can use the Internet, but cannot access

each other or access Ethernet devices on the network.

3. Give the guest network a name.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 161 162

No comments

Netgear D6200 User Manual Page 37