Netgear D3600-100UKS User Manual download pdf (Page 23)

Install and Access the Modem Router and Its Network

N600 and AC750 WiFi DSL Modem Routers

Note: The option for the Ethernet cable connection that is stated onscreen

applies to a cable or fiber Internet connection only (see Set Up Your

Modem Router for Cable or Fiber Service on page 26).

Take one of the following actions:

• If you already power-cycled the DSL modem (see Step 1 through Step 7), do the

following:

a. Select the None of the above radio button.

b. Click the Next button.

• If you did not yet power-cycle the DSL modem, do the following:

a. Unplug your DSL modem’s power, leaving the DSL modem connected to the wall

jack for your Internet service.

b. If your DSL modem includes a battery backup, remove the battery.

c. Wait 10 seconds.

d. If your DSL modem includes a battery backup, reinsert the battery.

e. Plug in your DSL modem’s power and turn on your DSL modem.

f. Wait two minutes.

g. Select the

I just power cycled the modem and waited for 2 minutes radio

button.

h. Click the

Next button.

18. (Only if the following screen displays) Specify how to manage problems with the detection of

the IP address for the Internet connection.

The screen that might display states that a problem occurred while detecting the Internet

connection IP address.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 201 202

No comments

Netgear D3600-100UKS User Manual Page 23