Netgear D3600-100UKS User Manual download pdf (Page 176)

Manage Port Forwarding and Port Triggering

176

N600 and AC750 WiFi DSL Modem Routers

10. Click the Apply button.

Your settings are saved. The rule is added to the table on the Port Forwarding / Port

Triggering screen.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.

 To change a port forwarding rule:

1. Launch an Internet browser from a computer or WiFi device that is connected to the

network.

2. T

ype http://www

.routerlogin.net.

A login screen displays.

3. Enter the user name and password for the modem router.

The user name is admin.

The default password is

password. The user name and

password are case-sensitive.

4. Click the OK button.

The BASIC Home screen displays.

5. Select ADVANCED >

Advanced Setup > Port Forwarding / Port Triggering.

The following figure shows two port forwarding rules.

Internal End Port Specify the internal end port by one of these methods:

• Leave the Use the same port range for Internal port check box selected.

• Clear the Use the same port range for Internal port check box and enter the

internal end port number that the service or application uses.

Internal IP address

Either enter an IP address in the Internal IP address field or select the radio button

for an attached device that is listed in the table.

Field Description

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 201 202

No comments

Netgear D3600-100UKS User Manual Page 176