Netgear WG102 User Manual download pdf (Page 57)

Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Management 4-7

October 2004

Saving and Retrieving the Configuration

The Backup/Restore Settings menu allows you to save or retrieve a file containing your wireless

access point’s configuration settings.

To save your settings, click the Save button. Your browser will extract the configuration file from

the wireless access point and prompts you for a location on your computer to store the file. You

can give the file a meaningful name at this time, such as WG102.cfg.

To restore your settings from a saved configuration file, enter the full path to the file on your

computer or click the Browse button to locate the file. When you have located it, click the Retrieve

button to upload the file. After completing the upload, the WG102 will reboot automatically.

Restoring the WG102 to the Factory Default Settings

It is sometimes desirable to restore the wireless access point to the factory default settings. This

can be done by using the Restore function, which restores all factory settings. After a restore, the

wireless access point's password will be password, the SSID will be NETGEAR, the DHCP client

will be disabled, the default LAN IP address will be 192.168.0.229, and the access point name is

reset to the name printed on the label on the bottom of the unit.

Using the Reset Button to Restore Factory Default Settings

To restore the factory default configuration settings without knowing the login password or IP

address, you must use the Default Reset button on the rear panel of the wireless access point (see

“WG102 rear panel” on page 2-7). The reset button has two functions:

• Reboot. When pressed and released, the Wireless Access Point will reboot (restart).

• Reset to Factory Defaults. This button can also be used to clear all data and restore all

settings to the factory default values.

To clear all data and restore the factory default values:

1. Power Off the WG102

2. Hold the Reset Button down while you Power On the WG102 for 5 seconds.

3. Continue holding the Reset Button until the LEDs blink twice.

4. Release the Reset Button.

The factory default configuration has now been restored, and the WG102 is ready for use.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 101 102

No comments

Netgear WG102 User Manual Page 57