Netgear WG102 User Manual download pdf (Page 56)

Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point

4-6 Management

October 2004

Download the new software file from NETGEAR, save it to your hard disk, and unzip it.

2. From the main menu Management section, click the Upgrade Firmware link to display the

screen above.

3. In the Upgrade Firmware menu, click the Browse button and browse to the location of the

image (.IMG) upgrade file.

4. Click Upload.

When the upload completes, your wireless access point will automatically restart. The upgrade

process typically takes about one minute.

In some cases, you may need to reconfigure the wireless access point after upgrading.

Configuration File Management

The WG102 Access Point settings are stored in the wireless access point in a configuration file.

This file can be saved (backed up) to a user’s computer, retrieved (restored) from the user’s

computer, or cleared to factory default settings.

From the main menu Management heading, click the Backup/Restore Settings link to bring up the

menu shown below.

Figure 4-4: Settings Backup menu

The three options displayed are described in the following sections:

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 101 102

No comments

Netgear WG102 User Manual Page 56