Netgear WG102 User Manual download pdf (Page 46)

Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point

3-21 Basic Installation and Configuration

October 2004

• Manual - enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F)

Select which of the four keys will be the default.

See “Overview of WEP Parameters” on page B-5 for a full explanation of each of these

options, as defined by the IEEE 802.11 wireless communication standard.

6. Click Apply to save your settings.

How to Configure WPA

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the

client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that

supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions

on configuring WPA settings.

To configure WPA, follow these steps:

1. Log in at the default LAN address of http://192.168.0.229 with the default user name of

admin and default password of password, or using whatever LAN address and password you

have set up.

2. Click Radius Server Settings in the Security menu.

Note: If you use a wireless computer to configure WEP settings, you will be

disconnected when you click Apply. Reconfigure your wireless adapter to match the

new settings or access the wireless access point from a wired computer to make any

further changes.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 101 102

No comments

Netgear WG102 User Manual Page 46