Netgear WG102 User Manual download pdf (Page 45)

Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Basic Installation and Configuration 3-20

October 2004

Choose to use the local MAC address database stored on the access point, or use the RADIUS

MAC address database stored on a RADIUS server.

• If you choose the RADIUS MAC Address Database, you must configure the RADIUS

Server Settings first.

• If you choose Local MAC Address Database, either select from the list of available

wireless cards the WG102 has found in your area, or enter the MAC address and device

name for a device you plan to use. You can usually find the MAC address printed on the

wireless adapter. Click Add to add the wireless device to the access list. Repeat these steps

for each additional device you want to add to the list.

5. Be sure to click Apply to save your wireless access control list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WG102.

How to Configure WEP

To configure WEP data encryption, follow these steps:

1. Log in to the WG102 using its default address of http://192.168.0.229 or at whatever IP

address the unit is currently configured Use the default user name of admin and default

password of password, or whatever LAN address and password you have set up.

2. Click the WEP/WPA Settings link in the main menu of the WG102.

Figure 3-10: Wireless Settings menu

Choose Open System or Shared Key authentication.

4. Select encryption strength.

5. You can manually or automatically program the four data encryption keys. These values must

be identical on all PCs and Access Points in your network.

• Automatic - enter a word or group of printable characters in the Passphrase box and click

the Generate button. The four key boxes will be automatically populated with key values.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

No comments

Netgear WG102 User Manual Page 45