N600 WiFi Range ExtenderModel WN2500RPInstallation Guide
10The extender’s wireless network name (SSID) changes to your existing WiFi network name, with _2GEXT or _5GEXT at the end of the name, depending on w
11Connect with NETGEAR genie Smart Setup1. Use a WiFi network manager on a computer or mobile device to find and connect to the NETGEAR_EXT (SSID) WiF
124. Type the network password (also called passphrase or security key) in the Password (network key) field and click the Continue button.5. Select a
137. Type the name (SSID) for your new extender WiFi network in the 2.4GHz Network Name (SSID) field and the 5GHz Network Name (SSID) field and click
14Repeat this step for all of your computers and mobile devices.9. Select the check box and click the Continue button.10. Unplug the extender and move
15Connect Ethernet-Enabled DevicesAfter the extender is connected to your existing WiFi network, you can connect a device to the extender using an Eth
16Access Extender SettingsAfter installation, you can log in to the extender to view or change the extender’s settings. 1. Connect a computer or mobil
17Frequently Asked QuestionsYou can find more information about your product in the user manual, which is available at http://support.netgear.com.The
18Will the extender work if I connect it to the router with an Ethernet cable?No. The extender is designed to connect wirelessly to the router or acce
19I enabled a wireless MAC filter (wireless access control or ACL) on my router. What should I do when installing the extender?When the wireless devic
2ContentsGetting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Meet Your Extender. . . . . . . . . . . .
SupportThank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to reg
3Getting StartedThe NETGEAR WiFi Range Extender increases the distance of a WiFi network by boosting the existing WiFi signal and enhancing the overal
4Meet Your ExtenderBefore you install your extender, familiarize yourself with its LEDs, buttons, and ports.Front Panel5 GHz Link Rate LEDDevice to Ex
5Rear PanelRestore Factory Settings buttonPower inputPower On/Off buttonLAN ports 1–4
6LED DescriptionsUse the LEDs during installation to find the best location for the extender or to monitor the extender performance.Power LED • Solid
75 GHz Link Rate LEDThis LED indicates a 5 GHz WiFi connection between the extender and the router or access point.• Solid Green. Best connection• Sol
8Install the WiFi ExtenderPlace the extender, apply power, and connect it to your WiFi network.Place the Extender and Apply Power1. Place your extende
9Connect with WPSWi-Fi Protected Setup (WPS) lets you easily join a secure WiFi network without typing the network name and password.WPS does not supp
Comments to this Manuals