Netgear WNHDE111 User Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Technical Specifications A-3
v1.1, May 2008
Restoring the Default User Name and Password
You can restore the factory default configuration settings to reset the bridge’s user name to admin,
the password to password, and the IP address to 192.168.0.100. This procedure erases your
current configuration, including your wireless security settings, and restores the factory defaults.
When you log in after resetting, the Smart Wizard configuration assistant prompts you to configure
these settings.
Electromagnetic Emissions
Meets requirements of FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B
C-Tick N10947 ???
Interface Specifications
LAN 10BASE-T or 100BASE-Tx, RJ-45
Internet 10BASE-T or 100BASE-Tx, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE
802.11 standard. Actual throughput will vary. Network
conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Radio Data Rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing ???
Frequency ???
Data Encoding 802.11n: ???
802.11a: ???
Maximum Computers Per Wireless
Network
Limited by the amount of wireless network traffic
generated by each node. Typically 30–70 nodes.
Operating Frequency Ranges ?
802.11 Security 40 bit (also called 64 bit) and 128 bit WEP, WPA-PSK
and WPA2-PSK.
Table A-1. Wireless-N AccessPoint/Bridge Default Configuration Settings
Feature Default Setting
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

Comments to this Manuals

No comments