Netgear WNHDE111 User Manual download pdf (Page 65)

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Using Network Management Tools 7-7

v1.1, May 2008

For each device, the table shows the IP address, NetBIOS host name or device name (if available),

and the Ethernet MAC address. To force the unit to look for attached devices, click Refresh.

Backing Up Your Configuration

The configuration settings are stored in a configuration file. You can back up (save) this file and

retrieve it later. Save your configuration file after you complete the configuration. If the unit fails

or becomes corrupted, or an administrator password is lost, you can easily re-create your

configuration by restoring the configuration file.

Managing the Configuration File

The configuration settings of the Wireless-N AccessPoint/Bridge are stored within the router in a

configuration file. You can back up (save) this file to your computer, restore it, or reset it to the

factory default settings.

From the main menu of the browser interface, under Maintenance, select Backup Settings.

The following sections describe the three available options.

Backing Up and Restoring the Configuration

The Restore and Backup options in the Settings Backup screen let you save and retrieve a file

containing your bridge’s configuration settings.

To save your settings, click Back Up. Your browser extracts the configuration file from the bridge

and prompts you for a location on your computer to store the file. You can give the file a

meaningful name at this time, such as comcast.cfg.

Note: If the bridge is rebooted, the table data is lost until it rediscovers the devices.

Tip: Before saving your configuration file, change the administrator password to the

default, password. Then change it again after you have saved the configuration file.

If you forget the password, you will need to reset the configuration to factory

defaults.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 81 82

No comments

Netgear WNHDE111 User Manual Page 65