Netgear WNHDE111 User Manual download pdf (Page 45)

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Securing My Wireless 4-9

v1.1, May 2008

4. Click the button in the Add WPS Client screen. The following screen displays:

The green button light on the Wireless-N AccessPoint/Bridge begins to blink in a regular

pattern. While the button light is blinking, you have 2 minutes to enable WPS on the device

you are trying to connect to the router.

5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to

connect to the router.

The Wireless-N AccessPoint/Bridge’s green button light ceases blinking and remains on

when one of these conditions occurs:

• The router and the client establish a wireless connection.

• The 2-minute window period expires for establishing a WPS connection. If the connection

is not established, no WPS security settings will be specified in the Wireless-N

AccessPoint/Bridge.

Security PIN Entry

There are two ways to enable a wireless client to join a network using a PIN: using the unit’s

security PIN or using the wireless client’s security PIN.

Using the Unit’s Security PIN

1. Obtain your unit’s security PIN from the rear panel of the router or from the Advanced

Wireless Settings screen.

2. On the wireless client, follow its specific networking instructions to enter the router’s security

PIN and to establish a wireless connection with the router.

Using the Wireless Client’s Security PIN

1. Log in to the WNHDE111.

Figure 4-4

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

No comments

Netgear WNHDE111 User Manual Page 45