WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Easy Secure Wireless Setup 2-7
v1.1, May 2008
Connecting Other Devices to a WNHDE111
There are three ways you can connect other devices to the access point:
• For wireless devices that support the WPS automated method, repeat the steps above for the
WPS setup method. WPS will automatically transfer the security settings from the Wireless-N
Access Point to the device you are adding.
• For wireless devices that do not support WPS, manually configure them. Refer to the
instructions in the product documentation of the wireless device you will add. The
WNHDE111 default WPA/WPA2 security key is the serial number printed on the back of the
unit. The default wireless network name (SSID) is NETGEAR-HD.
• For wired devices, use an Ethernet cable to connect to a free Ethernet port on the WNHDE111.
Figure 2-7
Default WPA/WPA2 security key
1TX18149020CB
Comments to this Manuals