Netgear WNHDE111 User Manual download pdf (Page 61)

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Using Network Management Tools 7-3

v1.1, May 2008

• Click Wireless to display wireless client address, mode, rate and signal strength status.

Table 7-3 describes the traffic statistics.

Wireless LAN

Wireless Radio Indicates whether the radio feature of the router is enabled. If not

enabled, the Wireless LED on the front panel is off.

WISH Identifies if WISH is active or not.

MAC Address This is the unique physical address being used by the Ethernet ports

of the wireless interface.

Network Name (SSID) The wireless network name (SSID) being used by the wireless port of

the router. The default is NETGEAR-HD.

Channel Identifies the channel of the wireless port being used. Click the link to

the online document “Wireless Networking Basics” in Appendix B for

the frequencies used on each channel. In Up to 300 Mbps mode,

there are two channels: a primary channel (P) and a secondary

channel (S).

Security Mode Indicates the wireless security mode:

•None

•WEP

• WPA/WPA2 (the default)

Wi-Fi Protected Setup Indicates whether the radio feature of the router is enabled. If not

enabled, the Wireless LED on the front panel is off.

LAN Computers The names and address of devices in the network.

Figure 7-2

Table 7-1. Device Info Status Fields (continued)

Field Description

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 81 82

No comments

Netgear WNHDE111 User Manual Page 61