Netgear WG602v3 User's Guide download pdf (Page 30)

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual

2-10 Installation and Configuration

v1.0, August 2006

3. When prompted enter the default User Name admin and default Password password into the

Once you have entered your User Name and Password, your Web browser should

automatically find the Wireless AP and display the home page, as shown in

Figure 2-3 on page

2-4.

NetBIOS Name Login

The NETGEAR WG602v3 54 Mbps Wireless Access Point can be configured remotely from

Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser

version 4.78 or above or Mozilla Firefox. You can connect to the WG602v3 by using its default

NetBIOS name or its default IP address.

To connect using the default IP address:

1. Enter the NetBIOS name of your access point. The default NetBIOS name is

NETGEARxxxxxx where xxxxxx is the last 6 digits of the WG602v3’s MAC address (for

example, NETGEAR123456, with no spaces or delimiters.). To locate the NetBIOS name of

your WG602v3, see the bottom label.

2. Open a Web browser.

Figure 2-7

Note: If the computer you are using to connect to the WG602v3 is on a different

subnet, you will not be able to connect via its NetBIOS name unless there is a

WINS server on your LAN. If the NetBIOS name login fails, use the procedure

for

“IP Address Login” on page 2-9

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

No comments

Netgear WG602v3 User's Guide Page 30