Netgear WG602v3 User's Guide download pdf (Page 50)

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual

4-2 Advanced Configuration

v1.0, August 2006

For each remote wireless access point MAC address that you add, the WG602 must validate that

the SSID, channel, and WEP configuration of the each remote access point match the settings of

this WG602. WEP can (and should) be used to protect this traffic.

To configure a point-to-point bridge:

1. Open a web browser and log into the WG602v3 using the addressing scheme you have set up.

2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen

will display showing the default settings for the wireless access point.

3. Select the Wireless Point-to-Point Bridging radio button to enable point-to-point bridging

and enter the MAC address of the Remote Access Point.

4. Check the Enable Wireless Client Association to allow wireless clients access to the wireless

access point.

Figure 4-1

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

No comments

Netgear WG602v3 User's Guide Page 50