Netgear WG302v1 User Manual Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
3-6 Management
v4.0, April 2006
Table 3-1. General Information Fields
Field Description
Access Point Information
Access Point Name
(NetBIOS name)
The default name may be changed if desired.
MAC Address Displays the Media Access Control address (MAC address) of the
wireless access point’s Ethernet port.
Country/Region Displays the domain or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access
point in a region other than one of those identified in this field.
Firmware Version The version of the firmware currently installed.
Access Point Mode Identifies the operating mode of the WG302: Access Point, Point-to-
point bridge, Multi-point bridge or Repeater.
VLAN(802.1Q) Shows whether the VLAN feature is enabled or disabled. Default is
disable.
Management VLAN ID If VLAN has been enabled, the default VLAN address ID of “1” is
entered to handle traffic and connections on the access point. (Cannot
be configured by the user.)
Current IP Settings
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point communication.
DHCP Client Enabled indicates that the current IP address was obtained from a
DHCP server on your network. Disabled indicated a static IP
configuration.
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 97 98

Comments to this Manuals

No comments