Netgear WG302v1 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
2-12 Basic Installation and Configuration
v4.0, April 2006
Enter
2. From the Country/Region menu, select the region where the WG302 can be used.
It may not be legal to operate the wireless features of the wireless access point in a region
other than one of those identified in this field. Unless a country domain is selected, the channel
cannot be changed (In the United States, the Country/Region is preset.)
3. The Turn Radio On radio box is checked and on by default.
You can also turn off the radio to disable access through this device. This can be helpful for
configuration, network tuning, or troubleshooting activities.
4. From the Operating Mode pull-down menu, select the desired wireless operating mode. The
options are:
Auto (11g/11b): Both 802.11g and 802.11b wireless stations can be used (default setting).
11g Only: Only 802.11g wireless stations can be used.
11b Only: All 802.11b wireless stations can be used. 802.11g wireless stations can still be
used if they can operate in 802.11b mode.
5. From the Channel/Frequency menu, select which operating frequency will be used. It should
not be necessary to change the wireless channel unless you notice interference problems when
setting up the WG302 near another access point. Some points to consider:
Access points use a fixed channel. You can select the channel used. This allows you to
choose a channel which provides the least interference and best performance. In the USA
and Canada, 11 channels are available.
Figure 2-8.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 97 98

Comments to this Manuals

No comments