Netgear WG302v1 User Manual Page 45
- Page / 98
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
Basic Installation and Configuration 2-21
v4.0, April 2006
Configuring RADIUS Server Settings (if required)
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 2-25, “Configuring WPA2 with RADIUS” on
page 2-27, or “Configuring WPA and WPA2 with RADIUS” on page 2-29 for specifics on
implementing these security options).
To set up or modify the RADIUS Server Settings:
1. From your Web browser, log in to the WG302 using the default LAN address of
http://192.168.0.228, user name admin and password password, or use the LAN address and
password that you set up.
2. Under Security in the main menu, select RADIUS Server Settings. The radius Server Settings
screen will display.
3. Enter the RADIUS Server settings:
• Authentication/Access Control RADIUS Server Configuration. This configuration is
required for authentication using RADIUS. IP Address, Port No. and Shared Secret is
required for communication with RADIUS Server. A Secondary RADIUS Server can be
configured which is used if the Primary RADIUS Server fails.
– IP Address: The IP address of the RADIUS Server. The default is 0.0.0.0.
– Port Number: Port number of the RADIUS Server. The default is 1812.
– Shared Secret: This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant.
• Reauthentication Time. The time interval in seconds after which the supplicant will be
authenticated again with the RADIUS Server. The default is 3600 seconds.
• Global-key Re-Key Time. Check on this option to enable Re-keying of Global Key. The
Global Key Re-Key can be done based on time interval in seconds or number of packets
exchanged using the global key. The default is 3600 seconds.
• Update if any station disassociates. Check on this option to refresh global key when any
stations disassociated with wireless Access Point.
• Accounting RADIUS Server Configuration. This configuration is required for
accounting using RADIUS Server. IP Address, Port No. and Shared Secret is required for
communication with RADIUS Server. A Secondary RADIUS Server can be configured
which is used on failure on Primary RADIUS Server.
- NETGEAR ProSafe 802.11g 1
- Wireless Access Point 1
- WG302 Reference Manual 1
- Technical Support 2
- Trademarks 2
- Statement of Conditions 2
- Radio Frequency Notice 2
- FCC Statement 3
- , May 12, 2006 4
- Contents 9
- About This Manual 13
- How to Use This Manual 14
- How to Print this Manual 14
- Chapter 1 17
- Introduction 17
- Key Features and Standards 18
- Introduction 1-3 19
- 1-4 Introduction 20
- System Requirements 21
- Package Contents 21
- Hardware Description 22
- 5. Power Socket 24
- Chapter 2 25
- Cabling Requirements 26
- Default Factory Settings 26
- 6HFXULW\2SWLRQV 27
- 5DQJH8SWR)RRW5DGLXV 27
- Figure 2-2 29
- Figure 2-3 30
- Figure 2-4 31
- Figure 2-5 32
- Setting Basic IP Options 33
- Figure 2-7 34
- Configuring Wireless Settings 35
- Figure 2-8 36
- Figure 2-9 40
- Figure 2-10 46
- Setting up A Security Profile 47
- Figure 2-12 48
- Figure 2-13 50
- Figure 2-14 51
- Figure 2-15 52
- Figure 2-16 53
- Figure 2-17 54
- Figure 2-18 55
- Figure 2-19 56
- Chapter 3 59
- Management 59
- 3-2 Management 60
- CLI Commands 61
- 3-4 Management 62
- Figure 3-3 62
- To access the General screen: 63
- 3-6 Management 64
- Management 3-7 65
- 3-8 Management 66
- Figure 3-5 66
- Table 3-2. Statistics Fields 66
- Management 3-9 67
- Figure 3-6 67
- 3-10 Management 68
- Figure 3-7 68
- Configuration File Management 69
- 3-12 Management 70
- Management 3-13 71
- Figure 3-9 71
- 3-14 Management 72
- Chapter 4 73
- Advanced Configuration 73
- 4-2 Advanced Configuration 74
- Figure 4-1 74
- Hotspot Settings 75
- Advanced Wireless Settings 75
- 4-4 Advanced Configuration 76
- Figure 4-3 76
- Advanced Configuration 4-5 77
- 4-6 Advanced Configuration 78
- Figure 4-4 78
- Advanced Configuration 4-7 79
- Figure 4-5 79
- 4-8 Advanced Configuration 80
- Figure 4-6 80
- Advanced Configuration 4-9 81
- Figure 4-7 81
- 4-10 Advanced Configuration 82
- Chapter 5 83
- Troubleshooting 83
- The LAN light is not lit 84
- Troubleshooting 5-3 85
- 5-4 Troubleshooting 86
- Appendix A 87
- Factory Defaults and 87
- Technical Specifications 87
- Technical Specifications 89
- Appendix B 91
- Related Documents 91
- B-2 Related Documents 92
- Appendix C 93
- Command Line Reference 93
- C-6 Command Line Reference 98
Related products and manuals for WLAN access points Netgear WG302v1
(28 pages)
WLAN access points Netgear WGR614 v5 User Manual
(172 pages)
(172 pages)
(43 pages)
WLAN access points Netgear WG602v3 User Manual
(122 pages)
(122 pages)
WLAN access points Netgear WG102 User Manual
(110 pages)
(110 pages)
WLAN access points Netgear MR814v2 User Manual
(142 pages)
(142 pages)
WLAN access points Netgear WG102 User Manual
(118 pages)
(118 pages)
WLAN access points Netgear HA501 User Manual
(23 pages)
(23 pages)
© 2020, manymanuals.com. All rights reserved. | 1.305 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals