Netgear WAB102 User's Guide download pdf (Page 20)

User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point

Setting Up Basic Wireless Connectivity

TCP/IP Configuration Parameters

If the WAB102 cannot locate a DHCP server upon powering up, it will default to

the IP address of 192.168.0.226. If you are not sure of the IP address of the

WAB102, restore the default IP address by pressing the Restore to Factory

Default button located on the WAB102 back panel for at least 5 seconds. The

WAB102 will pass the IP address from the DHCP server to the associated station

if the DHCP client is enabled.

CONFIGURATION DESCRIPTION

Access Point Name The unique name represents the access point.

The default Access Point Name is located on

the bottom label of WAB102. You may modify

the default name with a unique name up to 15

characters long.

Default: netgearxxxxxx, where xxxxxxx

represents the last 6 digits of the WAB102 MAC

address.

IP Address Specifies the IP address of the access point.

Default: 192.168.0.226

Subnet mask Specifies the subnet mask of the access point.

Default: 255.255.255.0

Default gateway Specifies the default gateway IP address.

Default: 0.0.0.0

DHCP Client The access point will get the IP address, subnet

mask and the default gateway automatically

from the DHCP server if the DHCP is enabled.

Default: Enable

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

No comments

Netgear WAB102 User's Guide Page 20