Netgear WAB102 User's Guide download pdf (Page 17)

User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point

14 Setting Up Basic Wireless Connectivity

Basic Configuration

The WAB102 802.11 a+b Dual Band Wireless Access Point can be configured

remotely from Microsoft Internet Explorer browser version 5.0 or above, or

Netscape Navigator web browser version 4.78 or above on your computer.

1. Determine the name of your access point.

To find the name of your access point, refer to the labels on the bottom of the

access point. The access point name should be similar to this, netgear10d4b5.

2. Open a web browser such as Internet Explorer or Netscape Navigator.

3. In browser Address or Location box, type in the name of your access

point, and press enter. You do not need to include "www" or "http://."

Note: There is no space required between “netgear” and the 6 digits of the

access point name.

Once you have entered your access point name, your web browser should

automatically find the WAB102 dual band AP and display the home page, as

shown above.

You may also access the WAB102 home page by specifying either the IP

address or the WAB102 name as printed on the bottom of the device.

Note: For up-to-date details on WAB102 configuration visit

www.netgear.com.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 48 49

No comments

Netgear WAB102 User's Guide Page 17