Netgear WAB102 User's Guide download pdf (Page 31)

User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point

28 Setting Up Basic Wireless Connectivity

802.11a Advanced Wireless LAN Configuration Parameters

CONFIGURATION DESCRIPTION

Transmit Power Transmit signal strength of the WAB102. The

options are 100%, 50%, 25%, 12.5% and

Lowest. Decreases the transmit power if more

than one AP is co-located using the same

channel frequency.

Default:100%

Beacon Interval Specifies the Beacon Interval value. Enter a

value in between 20 to 1000.

Default: 100

RTS Threshold The packet size that the wireless node uses to

determine if it should use the CSMA/CD

mechanism or the CSMA/CA mechanism for

packet transmission. With the CSMA/CD

transmission mechanism, the transmitting

station sends out the actual packet as soon as it

has waited for the silence period. With the

CSMA/CA transmission mechanism, the

transmitting station sends out an RTS packet to

the receiving station, and waits for the receiving

station to send back a CTS packet before

sending the actual packet data.

Default: 2346

Fragmentation Length This is the maximum packet size used for

fragmentation. Packets larger than the size

programmed in this field will be fragmented.

The Fragment Threshold value must be larger

than the RTS Threshold value.

Default: 2346

DTIM The Delivery Traffic Indication Message.

Specifies the data beacon rate between 1 and

255.

Default: 1

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 48 49

No comments

Netgear WAB102 User's Guide Page 31