Netgear WAB102 User's Guide download pdf (Page 9)

User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point

6 Introduction

WAB102 Wireless Access Point Front Panel

The WAB102 Dual Band Wireless Access Point provides these status LEDs.

The following table explains the LED indicators:

LED DESCRIPTION

Power

Off

No power. If this LED does not come on with the power adapter and

cord correctly installed, see Chapter 4, Troubleshooting.

Power is on.

Blink Indicates self test, loading software, or system fault (if continues).

Note: This LED may blink for a minute before going on steady.

Ethernet Link/Activity

Off

Green On

Indicates no Ethernet link detected.

100Mbps Fast Ethernet link detected, no activity

Green Blink Indicates data traffic on the 100Mbps LAN

Amber On 10Mbps Ethernet Link detected but no activity.

Amber Blink Indicates data traffic on the 10Mbps LAN

802.11a WLAN Link/Activity

Off No wireless link.

Slow Blink

Fast Blink

Associated with network but no activity.

Indicates the WAB102 802.11a wireless data transmission.

802.11b WLAN Link/Activity

Off No wireless link.

Slow Blink

Fast Blink

Associated with network but no activity

Indicates the WAB102 is 802.11b wireless data transmission.

Power

Ethernet

802.11a

802.11b

WLAN

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 48 49

No comments

Netgear WAB102 User's Guide Page 9