Netgear MP115 User's Guide download pdf (Page 38)

User’s Manual for the Wireless Digital Media Player MP115

5-4 Settings and Maintenance

November 2004 202-10038-01

6. The WEP Security screen will now be displayed. Detailed instructions for configuring WEP

can be found in Appendix B, “Wireless Networking Basics”.

7. The system reboots and connects to the selected wireless network.

Specifying the Wireless Location

You can specify the country where your wireless network operates.

1. Push Settings on the remote control to go to the Settings menu.

2. From the Settings menu, select Network, and then select Wireless.

3. Select Location, and choose the correct location for your network.

4. Click Apply to save the setting.

Setting a Static IP Address

The MP115 is set up to use DHCP. With DHCP, the MP115 get its IP address from a DHCP server

on the network. If your network does not use DHCP, then you need to change the MP115 settings

to a Static IP Address, and set the IP Address to a subnet within the correct range for your network.

1. Push Settings on the remote control to go to the Settings menu.

2. From the Settings menu, select Network, and then select IP Address.

The Settings: Network:IP Address screen appears.

3. Select Static.

4. Use the number buttons on the remote control to enter the IP Address. Use the OK button to

save each number and move to the next field.

5. After the IP address is set, enter the subnet mask.

Video Settings

Use the Video Settings menu to set the TV Aspect Ratio, Video Mode, or Video Output.

Setting the TV Aspect Ratio

You can set the Aspect Ratio to Letter Box, Full Screen, or 4:3.

1. Push the Settings button on the remote to go to the Settings menu.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

No comments

Netgear MP115 User's Guide Page 38