Netgear MP115 User's Guide download pdf (Page 39)

User’s Manual for the Wireless Digital Media Player MP115

Settings and Maintenance 5-5

November 2004 202-10038-01

2. Select Video.

3. Select TV Aspect Ratio.

4. Use the navigation buttons on the remote control to display the desired setting.

5. Select Apply, and push OK on the remote control.

Setting the Video Mode

Set the Video Mode to NTSC, or PAL.

1. Push the Settings button on the remote to go to the Settings menu.

2. Select Video.

3. Select Video Mode.

4. Use the navigation buttons on the remote control to display the desired setting.

5. Select Apply, and push OK on the remote control.

Video Output

Note: If you select the wrong Video Output, then you may not be able to see the menus on the

television. To correct this problem, push the Disp Sel button on the remote control. You can cycle

through each of the eight possible video modes to find and select the correct one.

You can choose S-Video, SCART, Component Progressive, or Component Interlaced.

• S-Video: This cable is not included in the package. If your television uses S-Video, you must

provide your own cable and set the Video Output to S-Video.

• SCART: This cable is often used in Europe and Australia, and is not included in the package.

However, if you have a SCART cable the MP115 will recognize it.

• Component Progressive and Component Interlaced: The MP115 is set by default to work

with component video cables. To use component progressive you must have a television that

supports this technology.

Changing the Video Output Settings

1. Push the Settings button on the remote to go to the Settings menu.

2. Select Video.

3. Select Video Output.

4. Use the navigation buttons on the remote control to display the desired setting.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 77 78

No comments

Netgear MP115 User's Guide Page 39