Netgear WNR2000 Specifications download pdf (Page 9)

Hardware Setup

N300 Wireless Router WNR2000v4

Front Panel

The router front panel has the following status LEDs and button:

Figure 2. Front panel

Table 1. Front panel LED descriptions

LED Description

Power • Solid amber. The unit is starting up after being powered on.

• Solid green. The power is on, and the router is ready.

• Blinking amber. A firmware update is in progress.

• Blinking green. The firmware is corrupt.

• Off. Power is not supplied to the router.

Internet

• Solid amber. The IP address has not been acquired.

• Solid green. An IP address has been received; ready to transmit data.

• Off. No Ethernet cable is connected between the router and the modem.

Wireless

• Solid blue. The wireless radio is operating.

• Off. The wireless radio is off.

LAN ports

1–4

• Solid green. The LAN port has detected a 100 Mbps link with an attached device.

• Solid amber. The LAN port has detected a 10 Mbps link with an attached device.

• Off. No link is detected on the LAN port.

WPS button and LED

LAN LEDs

Wireless LED

Internet LED

Power LED

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 81 82

No comments

Netgear WNR2000 Specifications Page 9