Netgear WNR2000 Specifications download pdf (Page 10)

Hardware Setup

N300 Wireless Router WNR2000v4

Back Panel

The back panel has the following buttons, ports, and connector:

Figure 3. Back panel

WPS • Solid green. Indicates that wireless security is enabled.

• Blinking green. The router is attempting to use WPS to add a wireless device or computer to

the wireless network.

• Blinking green rapidly for about 5 seconds. WPS has failed to add a wireless device or

computer.

• Blinking green rapidly and continuously. The router is in stuck in the temporary AP setup

locked state. For more information, see The WPS (Push 'N' Connect) Button Blinks Amber on

page 125.

• Off. No WPS connection exists.

Table 2. Back panel button, port, and connector descriptions

Port or Button Description

WiFi On/Off button Turns the wireless radio in the router on or off.

Restore Factory Settings button Press and hold this button for about 7 seconds to reset the router to its

factory default settings.

LAN ports Four local area network (LAN) 10/100 Mbps Ethernet ports for connecting the

router to your local computers.

Table 1. Front panel LED descriptions (continued)

LED Description

WiFi On/Off button

Restore Factory Settings button

LAN ports

Internet port

AC power connector

On/Off button

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

No comments

Netgear WNR2000 Specifications Page 10