Netgear WNR2000 Specifications download pdf (Page 47)

genie Advanced Home

N300 Wireless Router WNR2000v4

Note: If you change the LAN IP address of the router while connected

through the browser, you are disconnected. If this situation occurs, you

need to open a new connection to the new IP address and log in again.

 To change the LAN settings:

1. Select Advanced > Setup > LAN Setup.

The LAN Setup screen displays:

2. Enter the settings that you want to customize.

These settings are described in the following section, LAN Setup Screen Settings.

3. Click the Apply button.

LAN Setup Screen Settings

The following settings are available on this screen:

LAN TCP/IP Setup

IP Address. The LAN IP address of the router (by default, 192.168.1.1).

IP Subnet Mask. The LAN subnet mask of the router (by default, 255.255.255.0). Combined

with the IP address, the IP subnet mask allows a device to know which other addresses are

local to it, and which have to be reached through a gateway or router.

RIP Direction. Router Information Protocol (RIP) enables a router to exchange routing

information with other routers. This setting controls how the router sends and receives RIP

packets. Both is the default setting. With the Both or Out Only setting, the router broadcasts

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 81 82

No comments

Netgear WNR2000 Specifications Page 47