Netgear WNR2000 Specifications download pdf (Page 78)

Advanced Settings

N300 Wireless Router WNR2000v4

4. (Optional) Clear the check box under the Enable Router’s PIN check box to turn off

automatic disabling of the PIN.

You can change this setting only when the PIN is enabled. By default, automatic disabling

of the PIN is turned on.

5. (Optional) Clear the Keep Existing Wireless Settings check box.

By default, this check box is selected. However, when the check box is selected, some

applications such as Network Explorer in Windows Vista might not detect the router.

CAUTION: When you clear this check box and you add a new wireless client

through WPS, the router’s wireless settings change to an

automatically generated SSID and passphrase (also referred to as

the wireless network password or network key).

6. Click the Apply button.

Set Up a Wireless Card Access List

By default, any wireless device that is configured with the correct SSID is allowed access to

your wireless network. For increased security, you can restrict access to the wireless network

to allow only specific wireless devices based on their MAC addresses.

Note: If you use a wireless computer to set up a wireless card access list,

add your wireless computer to the access list; otherwise, you are

disconnected when you click the Apply button. To avoid this situation,

use a computer with a wired connection to access the router.

 To restrict access to your network to specific wireless devices:

1. Select Advanced > Advanced Setup > Wireless Settings.

The Advanced Wireless Settings screen displays.

2. Click the Set Up Access List button.

1 2 ... 73 74 75 76 77 78 79 80 81 82

No comments

Netgear WNR2000 Specifications Page 78