Netgear WNDRMAC Specifications download pdf (Page 75)

Advanced Settings

N600 Wireless Dual Band Gigabit Router WNDRMAC

Wireless Repeater. The router sends all traffic from its local wireless or wired computers to a

remote access point. To configure this mode, you have to know the MAC address of the

remote parent access point.

The WNDRMAC router is always in dual band concurrent

mode, unless you turn off one

radio. Be aware that if you enable the wireless repeater in either radio band, the wireless

base station or wireless repeater cannot be enabled in the other radio band. However, if you

enable the wireless base station in either radio band and use the other radio band as a

wireless router or wireless base station, dual band concurrent mode is not affected.

For you to set up a wireless network with WDS,

the following conditions have to be met for

both access points:

• Both acce

ss points have to use the same SSID, wireless channel, and encryption mode.

• Both acce

ss points have to be on the same LAN IP subnet. That is, all the access point

LAN IP addresses are in the same network.

• All L

AN devices (wired and wireless computers) have to be configured to operate in the

same LAN network address range as the access points.

Wireless Repeating Function

Select Advanced > Advanced Setup > Wireless Repeating Function to view or change

wireless repeater settings for the router.

The set of fields is the same for the 2.4 GHz or 5 GHz wireless network.

• Enable

Wireless Repeating Function (2.4 GHz/5 GHz). Select the check box for the

2.4 GHz or 5 GHz network to use the wireless repeating function.

• W

ireless MAC of this router. This field displays the MAC address for your router for

your reference. You will need to enter this MAC address in the corresponding Wireless

Repeating Function screen of the other access point you are using.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 113 114

No comments

Netgear WNDRMAC Specifications Page 75