Netgear WNDRMAC Specifications Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
Administration
70
N600 Wireless Dual Band Gigabit Router WNDRMAC
You can either use the Restore Factory Settings button on the back of the router (see Factory
Default Settings o
n page 104), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password
to password, and the LAN IP address to
192.168.1.1, and enables the router’s DHCP.
Set Password
This feature allows you to change the default password that is used to log in to the router with
the user name admin.
This is not the same as changing the password for wireless access. The label on the bottom
of your rou
ter shows your unique wireless network name (SSID) and password for wireless
access (see Label on
page 10).
To set the password for the user name admin:
1. Select Advance
d > Administration > Set Password to display the following screen:
2. Type the old password and type the new password twice in the fields on this screen.
3. If
you want to be able to recover the password, select the Enable Password Recovery
check box.
4. Click Apply
so that your changes take effect.
Password Recovery
NETGEAR recommends that you enable password recovery if you change the password for
the routers user name of admin. Then you will have an easy way to recover the password if it
is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome
browsers, but not in the Safari browser.
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 113 114

Comments to this Manuals

No comments