Netgear WNDRMAC Specifications Page 11
- Page / 114
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Hardware Setup
11
N600 Wireless Dual Band Gigabit Router WNDRMAC
Front Panel
The router front panel has the LEDs and icons shown in the figure. Note that the Wireless
and WPS icons are buttons.
Power Wireless USB Internet Ethernet (LAN) Wireless On/Off WPS
Figure 5. Front panel LEDs and buttons
The front panel has five status LEDs that you can use to monitor and verify various
conditions. There are also two buttons on the right (or at the bottom if the router is in its
stand). The LEDs are described in the following table.
Table 1. LED Descriptions
LED Description
Power/Test • Solid amber. The router is starting up after being powered on.
• Sol
id green. The router startup has completed and the router is ready.
• Off.
Power is not supplied to the router.
• Blinking green. The firmware is corrupted. See www.netgear.com/support.
• Bl
inking amber. The firmware is upgrading, or the Restore Factory Settings button was
pressed.
Wireless
• Solid blue. The wireless radio is operating in either 2.4 GHz or 5 GHz mode.
• Off.
The wireless radios are off for both 2.4 GHz and 5 GHz.
USB
• Solid green. The USB device had been accepted by the router and is ready to be used.
• B
linking green. The USB device is in use.
• Off.
No USB device is connected, or the Safely Remove Hardware button has been clicked and
it is now safe to remove the attached USB device.
Internet
• Solid green. An IP address has been received; ready to transmit data.
• Solid amber. The Ethernet cable connection to the modem has been detected.
• Off. No Eth
ernet cable is connected to the modem.
LAN • Sol
id green. A LAN port has detected a 1 Gbps link with an attached device.
• So
lid amber. One or more LAN ports have detected a 10/100 Mbps link with an attached device.
• Off. No lin
k is detected on any of the 4 LAN ports.
The WLAN and WPS buttons toggle the WLAN and WPS functions on and off.
•
WLAN On/Off button. Pressing and holding the wireless LAN button for 2 seconds
turns the 2.4 GHz and 5 GHz wireless radios on and off. If the Wireless LED is lit, then the
- N600 Wireless Dual Band 1
- Gigabit Router WNDRMAC 1
- Technical Support 2
- Trademarks 2
- Statement of Conditions 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 Security 4
- Chapter 7 Administration 4
- Chapter 8 Advanced Settings 5
- Chapter 9 Troubleshooting 5
- Hardware Setup 7
- Unpack Your New Router 8
- Hardware Features 9
- Back Panel 10
- Front Panel 11
- Position Your Wireless Router 12
- Connecting to the router 13
- Router Setup Preparation 14
- Types of Logins and Access 14
- NETGEAR Genie Setup 15
- Upgrade Router Firmware 16
- Manual Method 18
- Genie Basic Settings 19
- Internet Setup 20
- Attached Devices 22
- Parental Controls 23
- ReadyShare USB Storage 23
- Basic Wireless Settings 24
- Region Selection 25
- Wireless Network 25
- 2.4 GHz b/g/n and 5.0 GHz a/n 25
- Security Options Settings 26
- Guest Networks 27
- WEP Encryption 29
- WPA Encryption 29
- Genie Advanced Home 30
- Setup Wizard 31
- WPS Wizard 32
- Setup Menu 33
- WAN Setup 34
- Default DMZ Server 35
- Change the MTU Size 35
- Table 2. Common MTU Sizes 36
- LAN Setup 37
- LAN Setup Screen Settings 38
- Address Reservation 39
- QoS for a Router LAN Port 42
- QoS for a MAC Address 43
- USB Storage 45
- USB Drive Requirements 46
- ReadyShare Access 46
- File Sharing Scenarios 46
- Sharing Photos 47
- Basic Settings 48
- Add or Edit a Network Folder 50
- USB Storage Advanced Settings 51
- Available Network Folders 52
- Safely Remove a USB Drive 53
- Media Server Settings 53
- Specify Approved USB Devices 54
- Security 56
- Delete a Keyword or Domain 57
- Specify a Trusted Computer 57
- Schedule Blocking 59
- Administration 62
- Upgrade the Router Firmware 63
- View Router Status 64
- Statistics Button 65
- Connection Status Button 66
- Manage the Configuration File 69
- Set Password 70
- Advanced Settings 72
- Advanced Wireless Settings 73
- Wireless Repeating Function 75
- Set Up the Base Station 76
- Set Up a Repeater Unit 77
- Remote Computer Access Basics 78
- Add a Custom Service 83
- Set Up Port Triggering 85
- Dynamic DNS 87
- Static Routes 89
- Remote Management 91
- USB Settings 92
- Universal Plug and Play 92
- Traffic Meter 94
- Troubleshooting 96
- Quick Tips 97
- Troubleshooting with the LEDs 98
- Cannot Log In to the Router 99
- Cannot Access the Internet 100
- Changes Not Saved 101
- Incorrect Date or Time 101
- Wireless Connectivity 101
- Wireless Signal Strength 102
- Supplemental Information 103
- Factory Default Settings 104
- Technical Specifications 106
- Notification of Compliance 107
- FCC Caution 109
- Industry Canada 110
- Caution: 110
- Avertissement: 110
Related products and manuals for Routers Netgear WNDRMAC
Routers Netgear WNDR4700 Specifications
(140 pages)
(140 pages)
Routers Netgear WNR2000 Specifications
(82 pages)
(82 pages)
Routers Netgear R6200 User Manual
(130 pages)
(130 pages)
Routers Netgear WNDR4500 User Manual
(127 pages)
(127 pages)
Routers Netgear R6300 User Manual
(135 pages)
(135 pages)
Routers Netgear WNDR4000 User Manual
(104 pages)
(104 pages)
Routers Netgear DG834 Operations Instructions
(142 pages)
(142 pages)
Routers Netgear D6200 User Manual
(162 pages)
(162 pages)
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 0.494 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals