Netgear WNDRMAC Specifications download pdf (Page 25)

Genie Basic Settings

N600 Wireless Dual Band Gigabit Router WNDRMAC

If you use a wireless computer to change the wireless network name (SSID) or other wireless

security settings, you are disconnected when you click Apply. To avoid this problem, use a

computer with a wired connection to access the router.

1. On the

Basic Home screen, select Wireless to display the Wireless Settings screen.

You can scroll down to view more settings. The screen sections, settings, and procedures

are explained in the following sections.

2. Ma

ke any changes that are needed, and click Apply to save your settings.

3. Set up and

test your wireless devices and computers to make sure that they can connect

wirelessly. If they do not, check the following:

• Is your wireless de

vice or computer connected to your network or another wireless

network in your area? Some wireless devices automatically connect to the first open

network (without wireless security) that they discover.

• Does you

r wireless device or computer show up on the Attached Devices screen? If it

does, then it is connected to the network.

• If yo

u are not sure what the network name (SSID) or password is, look on the label on

the bottom of your router.

Wireless Settings Screen Fields

Region Selection

The location where the router is used. Select from the countries in the list. Note that in the

United States, the region is fixed to United States and is not interchangeable.

Wireless Network



2.4 GHz b/g/n and 5.0 GHz a/n

The b/g/n and a/n notation references the 802.11 standards of conformance. For example,

2.4 b/g/n conforms to 802.11b, 802.11g, and 802.11n at 2.4 GHz radio frequency.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 113 114

No comments

Netgear WNDRMAC Specifications Page 25