Netgear WNDRMAC Specifications download pdf (Page 14)

Getting Started with NETGEAR Genie

N600 Wireless Dual Band Gigabit Router WNDRMAC

Router Setup Preparation

You can set up your router with the NETGEAR Genie automatically, or you can use the Genie

menus and screens to set up your router manually. However, before you start the setup

process, you need to have your ISP information on hand and make sure the laptops, PCs,

and other devices in the network have the settings described here.

Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, you need to change the settings so

that it uses Dynamic Host Configuration Protocol (DHCP).

Gather ISP Information

If you have DSL broadband service, you might need the following information to set up your

router and to check that your Internet configuration is correct. Your Internet service provider

(ISP) should have provided you with all of the information needed to connect to the Internet. If

you cannot locate this information, ask your ISP to provide it. When your Internet connection

is working, you no longer need to launch the ISP’s login program on your computer to access

the Internet. When you start an Internet application, your router automatically logs you in.

• The ISP configuration information for your DSL account

• ISP login name and password

• Fixed or static IP address settings (special deployment by ISP; this is rare)

Wireless Devices and Security Settings

Make sure that the wireless device or computer that you are using supports WPA or WPA2

wireless security, which is the wireless security supported by the router. See

Basic Wireless

Settings on page 24for information about the router’s preconfigured security settings.

Types of Logins and Access

There are two separate types of logins that have different purposes. It is important that you

understand the difference so that you know which login to use when.

• Router login logs you in to the router interface from NETGEAR Genie. See Use

NETGEAR Genie after Installation on page 16 for details about this login.

• ISP login logs you in to your Internet service. Your service provider has provided you with

this login information in a letter or some other way. If you cannot find this login

information, contact your service provider.

• Wireless network key or passphrase. Your router is preset with a unique wireless

network name (SSID) and password for wireless access. This information is on the label

located on the bottom of your router.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 113 114

No comments

Netgear WNDRMAC Specifications Page 14