Netgear WGU624 User Manual download pdf (Page 33)

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Connecting the Router to the Internet 3-11

M-10153-01

Select you Internet service provider from the drop-down list.

Figure 3-7: Basic Settings ISP list

The screen changes according to the ISP settings requirements of the ISP you select.

4. If your Internet connection does require a login, fill in the settings according to the instructions

below.

Note: After you finish setting up your router, you will no longer need to launch the ISP’s login

program on your computer in order to access the Internet. When you start an Internet

application, your router will automatically log you in.

a. Select your Internet service provider from the drop-down list. Your choices are:

• Other — if you have installed PPP software such as WinPoET (from Earthlink) or

Enternet (from Pacbell), then select Other. For more information, see “Manual PPPoE

Configuration” on page 3-11.

• PPTP — this protocol is used in Austria and other European countries. For more

information, see “Manual PPTP Configuration” on page 3-13.

• Telstra Bigpond — this protocol is used mainly in Australia. For more information,

see “Manual Telstra Bigpond Configuration” on page 3-15.

b. The screen changes according to the ISP settings requirements of the ISP you select.

c. Fill in the parameters for your Internet service provider.

d. Click Apply to save your settings. Click the Test button to verify you have Internet access.

Manual PPPoE Configuration

If your ISP uses PPPoE, select Other for the Internet Service Provider in the Basic Settings menu

to display the following menu:

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 177 178

No comments

Netgear WGU624 User Manual Page 33