Netgear WGU624 User Manual Page 88
- Page / 178
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
7-10 Advanced Configuration
M-10153-01
RIP Version: This controls the format and the broadcasting method of the RIP packets that the
router sends. (It recognizes both formats when receiving.) By default, this is set for RIP-1.
• RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you
have an unusual network setup.
• RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2
format.
• RIP-2B uses subnet broadcasting.
• RIP-2M uses multicasting. Multicasting can reduce the load on non-router machines
because they do not listen to the RIP multicast address and will not receive the RIP
packets. However, if one router uses multicasting, then all routers on your network
must use multicasting.
Using the Router as a DHCP Server
By default, the router will function as a DHCP (Dynamic Host Configuration Protocol) server,
allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to
the router's LAN. The assigned default gateway address is the LAN address of the router. IP
addresses will be assigned to the attached PCs from a pool of addresses specified in this menu.
Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See “IP
Configuration by DHCP” on page B-10 for an explanation of DHCP and information about how to
assign IP addresses for your network.
If another device on your network is the DHCP server, or if you will manually configure the
network settings of all of your computers, clear the ‘Use router as DHCP server’ check box.
Otherwise, leave it selected.
Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP
Address. These addresses should be part of the same IP address subnet as the router’s LAN IP
address. Using the default addressing scheme, you should define a range between 192.168.1.2 and
192.168.1.253, although you may wish to save part of the range for devices with fixed addresses.
Note: If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You may need to restart your computer for the new
IP address setting to take effect.
- Reference Manual for the 1
- Double 108 Mbps 1
- Wireless Firewall Router 1
- Contents 5
- Chapter 1 11
- About This Manual 11
- How to Use This Manual 12
- How to Print this Manual 13
- 4 About This Manual 14
- Chapter 2 15
- Introduction 15
- 2-2 Introduction 16
- Introduction 2-3 17
- Security 18
- Extensive Protocol Support 19
- Package Contents 20
- The Router’s Front Panel 21
- The Router’s Rear Panel 22
- Chapter 3 23
- Connecting the WGU624 26
- &DEOH 27
- ,QWHUQHW 27
- SRUW 27
- ONNECT TO THE INTERNET 29
- Manual PPPoE Configuration 33
- Manual PPTP Configuration 35
- Chapter 4 39
- Wireless Configuration 39
- :LUHOHVV'DWD 40
- 6HFXULW\2SWLRQV 40
- 5DQJHXSWRIRRWUDGLXV 40
- Wireless Mode Options 41
- 4-4 Wireless Configuration 42
- Wireless Configuration 4-5 43
- 4-6 Wireless Configuration 44
- Wireless Configuration 4-7 45
- 4-8 Wireless Configuration 46
- Wireless Security Settings 47
- 4-10 Wireless Configuration 48
- WPA Encryption 49
- 4-12 Wireless Configuration 50
- Wireless Configuration 4-13 51
- Configuring WEP 55
- Wireless Configuration 4-19 57
- 4-20 Wireless Configuration 58
- Wireless Configuration 4-21 59
- 4-22 Wireless Configuration 60
- Chapter 5 61
- Content Filtering 61
- 5-2 Content Filtering 62
- Figure 5-1: Block Sites menu 62
- Content Filtering 5-3 63
- 5-4 Content Filtering 64
- Content Filtering 5-5 65
- Figure 5-4: Schedule menu 65
- 5-6 Content Filtering 66
- Figure 5-5: Logs menu 66
- Content Filtering 5-7 67
- Table 5-2. Log action buttons 67
- 5-8 Content Filtering 68
- Figure 5-6: E-mail menu 68
- Content Filtering 5-9 69
- 5-10 Content Filtering 70
- Chapter 6 71
- Maintenance 71
- 6-2 Maintenance 72
- Maintenance 6-3 73
- 6-4 Maintenance 74
- Upgrading the Router Software 75
- Configuration File Management 77
- Erasing the Configuration 78
- Chapter 7 79
- Advanced Configuration 79
- Configuring Port Forwarding 80
- Configuring Port Triggering 83
- Configuring WAN Setup Options 84
- 7-8 Advanced Configuration 86
- Advanced Configuration 7-9 87
- 7-10 Advanced Configuration 88
- Using Address Reservation 89
- Using a Dynamic DNS Service 90
- Configuring Static Routes 91
- Advanced Configuration 7-15 93
- Advanced Configuration 7-17 95
- Figure 7-8. UPnP Menu 95
- 7-18 Advanced Configuration 96
- Chapter 8 97
- Troubleshooting 97
- Power LED Not On 98
- LEDs Never Turn Off 98
- Troubleshooting 8-3 99
- 8-6 Troubleshooting 102
- M-10153-01 102
- Problems with Date and Time 103
- Appendix A 105
- Technical Specifications 105
- Electromagnetic Emissions 106
- Interface Specifications 106
- A-2 Technical Specifications 106
- Appendix B 107
- IP Addresses and the Internet 108
- Subnet Addressing 111
- Table B-2. Netmask Formats 112
- Private IP Addresses 113
- Related Documents 115
- IP Configuration by DHCP 116
- Ethernet Cabling 117
- Category 5 Cable Quality 118
- Inside Twisted Pair Cables 119
- Appendix C 123
- Preparing Your Network 123
- C-2 Preparing Your Network 124
- Preparing Your Network C-5 127
- Verifying TCP/IP Properties 128
- Preparing Your Network C-7 129
- C-8 Preparing Your Network 130
- Preparing Your Network C-9 131
- C-10 Preparing Your Network 132
- Preparing Your Network C-11 133
- C-12 Preparing Your Network 134
- Preparing Your Network C-13 135
- Properties button 136
- 3. Type ipconfig /all 137
- MacOS 8.6 or 9.x 138
- 4. Click Save 139
- Are Login Protocols Used? 140
- 4. Select the IP Address tab 141
- 5. Select the Gateway tab 141
- Computers 142
- Restarting the Network 143
- C-22 Preparing Your Network 144
- Appendix D 145
- Wireless Networking Basics 145
- Authentication and WEP 147
- Open System Authentication 148
- Shared Key Authentication 148
- Overview of WEP Parameters 149
- Key Size 150
- Wireless Channels 151
- WPA Wireless Security 152
- How Does WPA Compare to WEP? 153
- Wired Network with Optional 156
- 802.1x Port Based Network 156
- Access Control 156
- Wireless LAN 156
- Is WPA Perfect? 160
- Product Support for WPA 160
- Glossary 163
- 2 Glossary 164
- 4 Glossary 166
- X.500-lite 167
- 6 Glossary 168
- 8 Glossary 170
- 10 Glossary 172
- 12 Glossary 174
Related products and manuals for Routers Netgear WGU624
Routers Netgear FS116 User Manual
(2 pages)
(2 pages)
Routers Netgear HR314 User Manual
(20 pages)
(20 pages)
Routers Netgear MBR814 User Manual
(2 pages)
(2 pages)
Routers Netgear DG834 User Manual
(10 pages)
(10 pages)
Routers Netgear 782S User's Guide
(78 pages)
(78 pages)
Routers Netgear DGN3500 User Manual
(119 pages)
(119 pages)
Routers Netgear WNCE3001-100NAS User Manual
(27 pages)
(27 pages)
Routers Netgear 208-10026-01 User Manual
(30 pages)
(30 pages)
Routers Netgear Modem DGN2200V3 User Manual
(120 pages)
(120 pages)
Routers Netgear RH348 User Manual
(142 pages)
(142 pages)
Routers Netgear WPN824EXT- User Manual
(64 pages)
(64 pages)
Routers Netgear WNA1100 User's Guide
(25 pages)
(25 pages)
Routers Netgear NTV200S Installation Guide
(16 pages)
(16 pages)
Routers Netgear Modem FVS318N User Manual
(425 pages)
(425 pages)
Routers Netgear TA612V User Manual
(126 pages)
(126 pages)
Routers Netgear 762S User's Guide
(74 pages)
(74 pages)
Routers Netgear DC112A User's Guide
(156 pages)
(156 pages)
Routers Netgear NTGWGR614 User Manual
(146 pages)
(146 pages)
Routers Netgear CA 95054 User Manual
(46 pages)
(46 pages)
© 2020, manymanuals.com. All rights reserved. | 0.528 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals