Netgear WGU624 User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
7-14 Advanced Configuration
M-10153-01
To add or edit a Static Route:
1. Click the Add button to open the Add/Edit menu, shown below.
Figure 7-7. Static Route Add/Edit menu
2.
Type a route name for this static route in the Route Name box under the table. (This is for
identification purposes only.)
3. Select Private if you want to limit access to the LAN only. The static route will not be reported
in RIP.
4. Select Active to make this route effective.
5. Type the Destination IP Address of the final destination.
6. Type the IP Subnet Mask for this destination. If the destination is a single host, type
255.255.255.255.
7. Type the Gateway IP Address, which must be a router on the same LAN segment as the router.
8. Type a number between 1 and 15 as the Metric value. This represents the number of routers
between your network and the destination. Usually, a setting of 2 or 3 works, but if this is a
direct connection, set it to 1.
9. Click Apply to have the static route entered into the table.
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 177 178

Comments to this Manuals

No comments