Netgear WGU624 User Manual download pdf (Page 44)

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

4-6 Wireless Configuration

M-10153-01

Wireless Mode. This field determines which data communications protocols will be used:

• a only — dedicates the WGU624 to communicating with 802.11a wireless devices

exclusively.

• 108 Mbps only — only compatible 802.11a wireless stations that support 108 Mbps can

connect.

• Auto 108 Mbps — all 802.11a and NETGEAR 108 Mbps wireless stations can be used.

Security Mode:

• Open System — allows any device to join the network, assuming that the device SSID

matches the router SSID. Alternatively, the device can use the “ANY” SSID option to

associate with any available router within range, regardless of its SSID.

• Shared Key — only those computers that possess the correct authentication key can join

the network.

• 802.1x — defines port-based, network access control used to provide authenticated

network access and automated data encryption key management. 802.1x uses a protocol

called EAP (Extensible Authentication Protocol).

• WPA-PSK — (Wi-Fi Protected Access Pre-Shared Key) — use WPA standard encryption

• WPA — (Wi-Fi Protected Access) — use WPA standard encryption

Cipher Type:

• Disable

• WEP (Wired Equivalent Privacy) — use WEP 64, 128 or 152 bit data encryption.

• AES — Advanced Encryption Standard, a symmetric 128-bit block data encryption

technique. It is an iterated block cipher with a variable block length and a variable key

length.

• TKIP — the Temporal Key Integrity Protocol mechanism shares a starting key between

devices. Each device then changes its encryption key for every packet.

Basic 802.11g Wireless Settings

To configure the 802.11 g wireless settings of your router, click the Wireless g link in the main

menu of the browser interface. The Wireless 802.11g Settings menu appears, as shown below.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 177 178

No comments

Netgear WGU624 User Manual Page 44