Netgear WGR614v10 User Manual download pdf (Page 24)

Wireless-G Router WGR614v10 Reference Manual

Configuring Basic Connectivity 1-12

v1.0, February 2010

2. As appropriate, select the region in which the wireless interface will operate.

3. For the wireless network name (SSID), use the default name, or choose a suitable descriptive

name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters.

The default SSID is NETGEAR.

4. For the remaining settings, accept the defaults.

• The default channel is Auto.

It should not be necessary to change the wireless channel unless you notice interference

problems with another nearby wireless router or access point. Select a channel that is not

being used by any other wireless networks within several hundred feet of your router. For

more information about the wireless channel frequencies, click the link to the online

document “Wireless Networking Basics” in Appendix B.

• The default mode is b and g.

• The default for Security Options is None.

5. Click Apply to save your changes.

Note: In North America, you will not be able to change the region setting.

Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the

SSID of any wireless access adapters must match the SSID you specify in the

Wireless-G Router. If they do not match, you will not get a wireless connection

to the Wireless-G Router.

Note: If you are configuring the router from a wireless computer and you change the

router’s SSID, channel, or security settings, you will lose your wireless

connection when you click Apply. You must then change the wireless settings

of your computer to match the router’s new settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 121 122

No comments

Netgear WGR614v10 User Manual Page 24