Netgear WGR614v10 User Manual download pdf (Page 61)

Wireless-G Router WGR614v10 Reference Manual

Customizing Your Network Settings 4-12

v1.0, February 2010

If this check box is selected, the router communicates wirelessly only with other APs whose

MAC addresses are listed in this screen. The router still communicates with wire-connected

LAN devices.

Setting Up the Base Station

The wireless repeating function works only in hub and spoke mode. The units cannot be daisy

chained. You must know the wireless settings for both units. You must know the MAC address of

the remote unit. First, set up the base station, and then set up the repeater.

To set up the base station:

1. Set up both units with exactly the same wireless settings (SSID, mode, channel, and security).

Note that the wireless security option must be set to None or WEP.

2. From the main menu of the browser interface on the wireless router base unit, under

Advanced, click Wireless Repeating Function to display the Wireless Repeating Function

screen.

3. Select the Enable Wireless Repeating Function check box and the Wireless Base Station

radio button.

4. Enter the MAC address for the repeater units.

5. Click Apply to save your changes.

Figure 4-8

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 121 122

No comments

Netgear WGR614v10 User Manual Page 61